Tiltmeters

Tilt Meter Portable

Portable MEMS Tilt Meters use a MEMS inclinometer to measure tilt in either one or two axial planes perpendicular the surface of the base plate. Depending on the model, the output is an analog DC signal or digital output and is directly proportional to the sine of angle of tilt. In the horizontal position the DC output is zero. Portable MEMS Tilt Meters require placing the tilt meter in a reproducible position on a reference plate attached to the surface being monitored. The portable tilt meter system has a demountable sensor and is designed for applications where a large number of measuring points are to be observed.

  1. Data Sheet
  2. Manual

Applications

  • Monitor tilt of retaining and building walls
  • Tilt of concrete dams
  • Landslide monitoring
  • Ground subsidence
  • Building safety along adjacent excavations
  • Applications where the failure mode is expected to have arotational component
  • Differential compression in earth dams and embankments
  • Observation of benches and berms in open pit mines
  • Bridge piers

Features

  • Uniaxial or biaxial sensors available
  • Horizontal or vertical applications
  • Readout units and portable sensor are lightweightand easy to use
  • Data logger compatible
  • High accuracy and repeatability
  • Operational range and temperature coefficients exceed that of bubble sensor devices
TOP


LSS Consulting Engineers
No.7, 6th 6m, 1st East 18m Aflaknama Sq., Zafaranieh Tabriz, IRAN
Tel: +98.41.33335117

Copyright ©2013
LSS Ltd.
All Rights Reserved.